Actuated or operated by compressed air or other gas.

This references the orientation of the piston in a rotary system, relative to the motor face, with the piston and cylinder of the Pump Module mounted on the Motor/Base Module. The angular orientation [..]

Any gauge, meter, pump, etc. that has been systematically checked / adjusted to a known, certified standard.

The sudden formation and collapse of bubbles in liquids by means of mechanical forces creating low pressure.

IVEK offers both single and multiple channel configurations. A channel refers to a single Motor/Base or Actuator Module driven by a Controller Module. Single Channel systems are often bench-top units. [..]

Pump Module component where the piston is housed.

The deviation from zero or other neutral value by the indicator of a measurement instrument. The movement of a structure or structural part as a result of stress. Degassing Generally, referring to the [..]

Operation which automatically reverses liquid flow at the end of a dispense to improve repeatability and string breaking. The drawback volume is generally a fraction of the dispense volume.

A condition where the system controller has detected an improper condition or state of the equipment. The existence of the fault will be indicated on the system controller until the fault is cleared b [..]

Provides for washing the rear portion of the piston by a liquid passing at a rate of ~2 to 5 ml/min through a groove in the cylinder wall. The gland prevents the liquid being dispensed from accumulati [..]