|
kbpcoil.com
|
0 earned Badges No badges were found
Definitions (16)
1 |
1
0
Water stain
If oxygen is excluded from the wraps of coiled product, from the inner surfaces of stacked flat products, or from the faying surfaces of extruded products, and should moisture be permitted to enter th [..]
Meaning awaits approval from a moderator |
2 |
0
0
annealing
One of several systems that serve to measure a metal’s resistance to mechanical indentation. There are other hardness testing devices, but the Brinell equipment provides the readings most commonly fou [..]
Meaning awaits approval from a moderator |
3 |
0
0
Conversion coatings
Proprietary solutions, usually of a chromate or phosphate variety, which, when applied to a clean aluminum surface will serve to increase the metal’s resistance to corrosion and provide a good base fo [..]
Meaning awaits approval from a moderator |
4 |
0
0
corrosion
The deterioration of material due to its reaction to its environment. Depending upon the type of corrosive conditions, the deterioration may be staining, pitting, flaking or, in very severe cases, fra [..]
Meaning awaits approval from a moderator |
5 |
0
0
elongation
One of the mechanical properties of aluminum, i.e., the ability of the metal to stretch, or elongate, when it is subjected to an applied stress. The distance the metal will stretch from the point wher [..]
Meaning awaits approval from a moderator |
6 |
0
0
ingot
A cast form of the metal that is suitable for remelting or fabricating. The ingot may take the form of rolling ingot, extrusion ingot, forging ingot or remelt ingot. The size and shape of the cast pro [..]
Meaning awaits approval from a moderator |
7 |
0
0
mechanical properties
Those properties associated with the material’s reaction when force is applied, or that involve the relationship between stress and strain. This would include tensile properties, modulus of elasticity [..]
Meaning awaits approval from a moderator |
8 |
0
0
ROCKWELL HARDNESS
Another of the methods used to determine a metal’s resistance to indentation. Rockwell equipment is more widely used than the Brinell equipment and many more testers of aluminum will refer to the Rock [..]
Meaning awaits approval from a moderator |
9 |
0
0
slitting
A high-speed method of cutting sheet in coiled form to narrower width coils. Although there are flat sheet slitters in existence, most machines will only accommodate coiled products. Two circular kniv [..]
Meaning awaits approval from a moderator |
10 |
0
0
Ultimate tensile strength
Another common term to describe mechanical strength. This metal property is expressed in thousands of pounds per square inch and denotes how much stress can be gradually applied to the metal before it [..]
Meaning awaits approval from a moderator |
To view all 16 definitions, please sign in.